In this video
- The communication cable, condensate hose, and refrigerant line set (with extenders) all pass through a single wall hole
- The indoor unit weighs about 25 pounds, so a second person makes mounting easier
- Quick ’n’ EasyTM kits always route lines through the right-hand hole on the bracket; standard installs can go left or right
- The condensate hose must stay on the bottom of the bundle so water can drain downhill instead of getting trapped by the line set
- The unit clicks onto bracket tabs and grooves, with triangle markers showing where to press to release it later
Questions this video answers
Do I need two people to install the Airspool indoor unit?
It helps. The indoor unit weighs about 25 pounds, and you have to guide the communication cable, condensate hose, and line set through one wall hole while lifting it onto the mounting bracket, so a second person makes it much easier.
Which hole do I use to mount the indoor unit, left or right?
The mounting bracket has two holes. Standard Airspool installs can go left or right, but all Quick ’n’ EasyTM kits route the lines through the right-hand hole.
Why does the condensate hose need to be on the bottom?
Water doesn't flow uphill, so if the condensate hose ends up twisted above the line set, it won't drain properly. Keep the condensate hose on the bottom of the bundle so gravity can do its job.
How does the Airspool indoor unit attach to the wall bracket?
The bracket has four tabs, and the back of the indoor unit has matching grooves and tabs: two grooves that hook over the top tabs and two tabs that click into the bottom of the bracket.
How do I take the indoor unit off the wall later if I need to?
Small triangle markers on the bracket line up with the mounting tabs. Press on those triangles and the bottom clip tabs release, letting you lift the unit off the wall.
What has to run through the wall for a mini-split installation?
The communication cable, the condensate hose, and the refrigerant line set with its extenders all route through the same wall hole, from the indoor unit through to the outdoor unit.
Transcript
Read the full transcript
So, the next step: learn about mounting this indoor unit up on the wall. It's a little tricky — why? Because we call it a DIY unit, but really, you might want to have two people, since it's got some weight to it, about 25 pounds. You have to route the condensate hose, the communication cable, and the line set — plus the line set extenders — all through that one little hole.
So refer to the template bracket, refer to the standard installation version of the Airspool install, or refer to your instruction manual. You'll see how this mounts — you'll see two holes here. Forget the left-hand one you saw, because that one's for the standard version; you have the option to go left or right. All of our Quick ’n’ EasyTM versions go through the right-hand hole here.
Okay, so then you'll see these tabs, four tabs, and on the back of the indoor unit there are four grooves, or two grooves and two tabs, that mount to the bottom two tabs. So it's a little tricky — wish me luck. Not everybody has a buddy to help, but feel free to have a friend give you a hand.
First we'll put in the communication cable. This hole obviously goes all the way through to the outside, so your hole runs from the inside wall to the outside wall. Next, the line set. And remember, once this is all said and done, you always want — sorry, not the line set, the condensate hose — you want that to be on the bottom. If it gets twisted around the line set, water doesn't like to roll uphill, so keep it on the bottom.
Now let's see if we can get this hung on the tabs — I'm almost done. Okay, everything looks pretty good there; the condensate hose is on the bottom.
Now you'll see some little triangles here, and those should line up right at the center of your tabs. They're not only there to help you line things up now — if you ever want to release the indoor unit from the wall, you push on those, and the bottom clip tabs will release. Okay, voilà.
