We found this out by accident. Here's what happened, and why the unit does it.
Heat mode, but no heat
We were about to make a video on how a heat pump is different from heat made with electric resistance or by burning something. So we turned the unit on in heat mode.
No heat came out. It was 95 degrees outside.
Left: 95 degrees outside. Right: the unit is set to heat, but the thermometer reads just 74.5°F at the louvers.
Each unit has its own limit
Your heat pump may do the same thing. Ask for heat when it's above a certain temperature outside, and you won't get any.
That limit is not the same for every unit. Different models stop heating at different outdoor temperatures. Check your unit's specs to find yours.
Why it won't heat when it's hot out
Todd explains it in the video. Look at the outdoor coil. It's much bigger than the indoor coil, so it absorbs heat much faster.
When it's too hot outside, that big coil takes on too much heat. The refrigerant gas going back to the compressor gets too hot. The compressor doesn't like that.
Too much heat can overheat the compressor's motor windings. It also pushes the pressures in the system higher. In the end, the unit would shut down. That's why the unit is set up not to heat when it's too warm outside. It protects the compressor.
You probably don't need heat at 95 degrees
Let's be honest. At 95 degrees, you don't need heat, unless you're making a video.
But this can catch you early in the season. The outdoor temperature climbs, you switch to heat, and nothing happens. It's easy to think your heat pump isn't working.
Don't panic. Check the outdoor temperature first. That may be the whole reason.
If it's not warm outside and your unit still won't heat, call or text us at (725) 699-1200. We build these. We're glad to help.
More on heat pumps and temperature:
- Running a heat pump past its rated temperature (the cold end of the range)
- Mini-split dF code: defrost mode explained

